Introduction - Heatrae Sadia B3M Fitting Instructions And User Manual

1.0 INTRODUCTION

Thankyou for purchasing a Heatrae Sadia B3M or C3M vented water heater.
The B3M or C3M water heater is manufactured in the UK to the highest
standards and has been designed to meet all the latest relevant safety
specifications.
1.1 IMPORTANT POINTS
The B3M or C3M must be installed and commissioned by a competent
person. Please read and understand these instructions before installing the
B3M or C3M. Following installation and commissioning, the operation of the
B3M or C3M should be explained to the user and these instructions left with
them for future reference.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervi-
sion.
Children must be supervised to ensure they do not play with
the appliance.
Means for disconnection from the supply mains having a con-
tact seperation in all poles that provide full discnnection under
overvoltage category III conditions is required. The instructions
shall state that means for disconnection must be incorporated
in the fixed wiring in accordance with the wiring rules.
The B3M or C3M vented water heaters are designed to be wall mounted.
Ideally they should be mounted close to where hot water is required most
frequently. Pipe runs should be kept to a minimum.
The B3M and C3M can be installed either as an Open Outlet or Cistern Fed
type unit when used with the appropriate fittings.
3