Heatrae Sadia STREAMLINE OVERSINK 95010283 Fitting Instructions And User Manual page 8

FIGURE 06 - PLUMBING DIAGRAM
3.5 SPOUT ASSEMBLY
1. Fit the 1/2"BSP nut to the inner container boss.
2. Remove the spout clamp.
3. Fit the spout through the back plate and grommet.
4. Re-fit the spout clamp (ensure the spout clamp ribs engage with the spout
and hold it securely in place)
5. Tighten the 1/2" BSP nut.
6. Ensure the grommet is re-seated (snapped to the backplate)
7. Fit the spout front to the spout body (see figure 8 overleaf).
FIGURE 07: SPOUT
SPOUT CLAMP
GROMMET
SPOUT
8
WATER
HEATER
INLET
FLOW
RESTRICTOR
WATER
SUPPLY
SERVICE
VALVE
X2 SCREWS
BSP NUT