Introduction - Heatrae Sadia Aquatap Boil and Chill Installation And User Manual

BOIL AND CHILL MODEL (INCLUDING BOIL AND AMBIENT)

1.0 INTRODUCTION

Thank you for purchasing a Heatrae Sadia Aquatap unit. This unit is manufactured to the highest
standards and has been designed to meet all the latest relevant constructional and safety specifications.
The Aquatap unit must be installed (see sections 3.0, page 7 to 9.0, page 14), commissioned (see
section 10.0, page 15) and maintained (see section 12.0, page 20) by a competent person. Please
read and understand these instructions prior to installing your Aquatap unit. Following installation
and commissioning of the unit, the operation of the Aquatap should be explained and demonstrated
to the user. Instructions for use are explained in section 11.0, page 19. These instructions should
be left with the user for future reference.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be made by children
without supervision.
Plus is a patented control system for managing the efficiency of the Aquatap's boiling cycle.
Intelliboil
TM
It regularly brings the contents of the water container to boil in response to ongoing user demand.
However, when there has been no draw off for a period of one hour, Intelliboil
stored water temperature. This avoids unnecessary boiling - possibly for a number of hours or even
days - until there is renewed user demand. When this occurs, the boiling cycle resumes.
The appliance is intended to be used in commercial applications such as (but not limited to):
• Hotel conference suites
• Waiting rooms
• Staff room kitchens/rest rooms
COMPONENT CHECKLIST
Before commencing installation, please check that all the following components have been supplied
in the packaging:
• Aquatap dispensing tap (Boil and Chill/Ambient Model)
• Aquatap water heating unit
• Heatrae Sadia Superchill 30B (Boil and Chill Model)
• Water Filter Kit
• 3 x 0.5m hose
• 6 x hose clamps
• 10mm to 8mm elbow push fit adaptor (Boil & Chill only)
• 10mm to 6mm elbow push fit adaptor (Boil & Chill only)
• 6mm to 6mm stem elbow push fit adaptor (Boil & Chill only)
• Tap C clamp box spanner
Plus steps back the
TM
3