Raider RD-SGC04 User Manual page 21

solvent or water.
Union nut
Air cap
Caution! Never clean nozzle or air holes in the spray gun with sharp metal objects.
Assembly
Put the nozzle onto the gun body and find the correct position by turning it. The rib on the nozzle should fit
into the groove on the gun body. Put the air cap onto the nozzle and tighten it using the union nut.
groove
ENVIRONMENTAL PROTECTION
In view of environmental protection electrical appliances, additional accessories and packing must be subject
to appropriate processing for reuse of the compound materials. According the European Guideline 2012/19/EC
for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no
longer usable must be collected separately and disposed of in an environmentally correct manner.
Explanatory diagram
1. Air cap
2. Nozzle
3. Spray gun
4. ON/OFF switch
5. Lock for handle
6. Handle
Nozzle
rib
7. Mains cable
8. Knob
9. Wheels
10. Air hose
11. Container
12. Trigger
The rib should fit into the groove.
21