Raider RD-SGC04 User Manual page 17

17
2. START-UP
Before connecting to the mains supply, be sure that the supply voltage is identical with the value given
on the rating plate.
1. Unscrew the container from the spray gun.
2. Adjust the suction tube.
a) If spray in a downward direction, the angled end of the suction
tube should be pointing towards the front of the gun.
b)If spray in an upward direction, the angled end of the suction
tube should be pointing toward the rear of the gun.
3. Pour material into container, make sure not to exceed the limit.