BluStream DA11AEN Quick Reference Manual page 3

Advanced Dante® Settings
It is also possible to change the settings of the DA11AEN under the "Device Info" screen in the Dante Controller
software. To do so, select the "Device Config" menu.
Here we can adjust the sample rate of the DA11AEN. Please Note: that Dante® products can only transmit or receive
audio from other Dante® products that are set up with the same sample rate. A mismatch in sample rate may stop
audio from transmitting.
Under the "Device Config" screen we can also adjust the latency of the DA11AEN from 1, 2 or 5 milliseconds.
Gain Adjustment
Depending on the connected audio device, it may be necessary to adjust the gain or input sensitivity.
The DA11AEN features a 5 pin switch on the side of the device to adjust the output gain of each channel from
various settings between +18dBu to -10dBV.
Contact: support@blustream.com.au | support@blustream-us.com
SWITCH POSITION
1
2
3
4
5
| support@blustream.co.uk
DA11AEN QUICK REFERENCE GUIDE
OUTPUT SENSITIVITY
+18dBu
+4dBu
+0dBu
0dBV
-10dBV
REVA2_QRG_DA11AEN_210811
03