BluStream DA11AEN Quick Reference Manual page 2

DA11AEN QUICK REFERENCE GUIDE
Dante Controller
Dante Controller software is required in order to setup and configure the DA11AEN as well as control your Dante®
network. Audinate provide extensive training videos and documentation on their website. This can be found here:
http://www.audinate.com/products/software/dante-controller
Upon connecting your DA11AEN to a compatible network, the Dante Controller software should automatically
discover the device. The DA11AEN will appear in the Dante Controller with a name denoted with "BLS". On the
"Routing" screen you can create audio routing between Dante® encoders and decoders in your system.
By default the DA11AEN is shipped with its network settings set to obtain an IP Address automatically. This means
that if a DHCP server is present on your network, it will provide the DA11AEN with an IP Address. If no DHCP server
is present then the DA11AEN will receive a default IP Address in the 169.254.xxx.xxx range. To change the IP Address
of the DA11AEN, you must enter the "Network Config" menu in the "Device Info" screen of the Dante Controller
software.
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk
02