Table of Contents
Advertisement
Maintenance
8.
When servicing is complete, reattach the pump to the MicroStar.
a. Place the pump back into the MicroStar.
b. Reinsert the four retaining screws into their proper position of the pump tray; tighten
each screw.
c. Reattach the tubing connector; tighten with a hex wrench.
d. Plug the power cord back into the power connector.
e. Turn on the pump.
9.
Place the cover back onto the MicroStar. Reinsert the two retaining screws (one on each
side) and tighten.
18
MicroStar 022
Jul 09
Advertisement
Table of Contents
Need help?
Do you have a question about the MicroStar 022 and is the answer not in the manual?