Micromeritics MicroStar 022 Installation Manual page 15

MicroStar 022
TAMS
Install the software:
1. Insert the CD containing the TAMS software into the CD-ROM drive.
2. Select Start > Run; the Run dialog is displayed.
3. Click
Browse
4. Double-click on Setup.exe to start the setup program. Follow the instructions displayed
on the screens; install the program in the default directory.
5. After installation is complete, you will be prompted to restart your computer; click the
option to restart.
6. Remove the CD containing the TAMS software.
After restarting your computer, the MicroStar must be registered in the Windows Registry.
1. Open Windows explorer; navigate to C:\Program Files\TAMS\Manuals.
2. Double-click on the file named LabVIEW settings for OPC Quadrupole.reg, the
Registry Editor dialog is displayed.
3. Click
Yes
the dialog.
Jul 09
and navigate to your CD-ROM drive.
to update the Registry. A Confirmation dialog is displayed; click
Installation
Double-click
on this file.
to close
OK
9