Photo Cd/Laser Disk/Receivers - Loewe CT1163 Operating Instructions Manual

Connecting other equipment – selecting video equipment
Selecting the video equipment:
Call the menu:
Select „Video"
MEN
Select „Installation"
Installation
AV1: Video/Camera
Select the video equipment
TV End
Setting AV sound:
Select „TV setup"
MEN
Select „Special functions"
Select „AV sound"
Special functions
Maximum volume
Signal Cinch
AV Sound
+ or Setting sound
–
TV End
Which audio/video equipment can you connect to the EURO-AV socket?
Call the „Video-Connect" menu. You will get an overview of the connectable
equipment and signal types for the video connection socket (EURO-AV).
1. Press the
2. Select the „Video" line with the blue
MEN
button
3. Select „Installation" with the yellow
button
4. Press the
Video/Camera 5. Select the video equipment with the
Photo CD
yellow buttons
Laser Disk
6. Exit the menu by pressing the
Receiver
Decoder
button, the settings are then stored.
RGB
Setting AV sound
For two-sound broadcasts you can select sound 1 (main sound) or sound 2 (foreign
language) or sound 1+2 and record with a stereo video recorder. For a mono video
recorder you only set sound 1 or sound 2; on sound 1+2 both languages would be
recorded mixed.
MEN
1. Call the „TV setup - Special functions"
menu. Press the
2. Select the „TV setup" line with
3. Select the „Special functions" line with
4. Press the
5. Select the „AV sound" line with
4O
fixed
6. You can set „ Sound 1", „ Sound 2" or
Sound1+2
„Sound 1+2" for stereo video recorder
with the buttons
7. End the input with
button.
MEN
.
.
button.
MEN
.
button.
MEN
.
button.
MEN
.
+ –
.
TV
The signals from S-Video equipment, e.g.
SVHS video recorders or photo-CD players
are recognized automatically and the correct
signal type set for the AV connection socket
used. If an SVHS video recorder is set to
VHS mode, the CVBS signal type is set
automatically. When connecting a Photo CD
unit simply select the line "
A set with RGB signals, i.e. red,
TV
green and blue signals, can be connected
to the EURO-AV socket or a Pay-TV
decoder, e.g. for Première.
Note:
With Sound 1+2 both sounds are
transmitted through the EURO-AV socket.
.
If interference occurs during a stereo
broadcast, you can switch over to „Mono"
by pressing the „Mute"
pressing the „Sound functions"
.
until the Stereo line is marked in white. You
can switch to Mono with the buttons
. The Mono signal is then applied
– +
at the EURO-AV socket.
Photo CD".
button then
button
41