Loewe CT1163 Operating Instructions Manual page 28

TV setup - picture/sound – normal picture and sound/factory setup
Storing normal setup values for picture
and sound:
Call the menu
MEN
Select "TV setup"
Select "Normal settings"
Station
Video
Timer functions
Child lock
TV setup
Normal settings
Factory setup
GB F I E NL DK S
On-screen display
Information
Teletext
Special functions
X
Store
Picture/sound factory setup
Call the menu
MEN
Select the "TV setup" line
Select „Factory setup"
Station
Video
Timer functions
Child lock
Normal settings
TV setup
Factory setup
GB F I E NL DK S On-screen display
Information
Teletext
Special functions
X
Call factory setup
Select "Normal settings"
X
Store as normal setting
28
Normal values for picture and sound
You can set the values for contrast, brightness, colour intensity, volume, treble and bass
to meet your own requirements and store them as your own personal „Setup values".
Adjust the picture and sound first. Then store the set values with the „TV setup" menu.
1. Call the menu by pressing
2. Select the „TV setup" line with the blue
button
3. The „Normal settings" line must be
marked in yellow, mark with the yellow
4. Press the
X
Your setup values for picture and sound are
now stored and remain your personal
„normal values" until you store different
values with this menu.
Normal values
Picture/sound factory setup
The factory setting gives you a suggestion
for the optimum settings of picture and
sound. You can adopt the factory setting as
the normal TV setup.
Call factory setup:
1. Call the menu by pressing the
button.
2. Select the „TV setup" line with the blue
button
3. Select the „Factory setup" line with the
yellow button
4. Call factory setup, press the
5. Mark the „Normal settings" line with
the yellow button
6. Store with
.
MEN
.
button if necessary.
button to store.
X
MEN
.
.
X
.
as „normal setting".
X
The „Normal values" are retained even
when the set is switched off at the on/off
switch. The „normal values" are called
automatically when the set is switched back
on.
You can call „your normal values" again and
again with the Picture/sound normal
button .
The factory settings are fixed values for a
good picture and sound reproduction. The
following are set: contrast, brightness,
colour, volume, treble and bass.
button.