Demontage und Montage der Lichtschranke
Entfernen Sie zunächst die Motorunit, wie im Kapitel
montage und Montage der Motorunit"
Entfernen Sie das Kabel zum Mainboard.
Entfernen Sie die beiden Schrauben und nehmen Sie das
Modul weg.
Die Montage erfolgt in umgekehrter Reihenfolge.
Beachten Sie insbesondere die Hinweise zur Justage der
Motorunit im Kapitel
„Demontage und Montage der Mo-
torunit".
Disassembly and assembly of photo sensor
„De-
Remove first the motor unit. as described in chapter
beschrieben.
sassembly and assembly of motor
Remove the cable to the main board.
Remove both screws and remove the module.
The Assembly is to be performed in reverse order.
Note in particular the instructions for adjusting of the motor
unit in chapter
19
unit".
„Disassembly and assembly of motor
„Di-
unit".