Fine Tuning/Program Name/Storing - Loewe CT1163 Operating Instructions Manual

Station search and store
Calling the „Fine tuning" menu:
Select the „Fine" line
Search and store
Channel V/UHF O8
Frequency 196.75MHz
Fine 8
Storage 24
Name TELE5
Norm Auto.-BG
AV Source ---
+ M
–
TV Menu off
Fine tuning of the station:
+ picture sharper
–
Program name:
Select „Name" line
Select program name
Selecting the memory slot:
Select „Storage" line
Search and store
Channel V/UHF O8
Frequency 196.25MHz
Fine O
Storage 24
Name TELE5
Norm Auto.-BG
AV Source ---
Select memory slot or enter with the
number buttons
X Store
Fine tuning of the station
The TV sets itself automatically to the best picture quality (AFC). In the unlikely event that
the picture needs to be adjusted, e.g. for the video recorder station, you can change the
station adjustment with the fine tuning.
Select the „Fine" line with the
button.
Tune to an „oversharp picture" with the
button
with the
channel number when tuning, the fine tuning
may overlap the channels.
Program name
If no name is entered under „Name" for the set station, you can enter a name or choose
one from the name list.
Select the „Name" line with the
button.
picture unsharp
Carry out steps E, F and G described on
page 60 or select a name from the name
list.
Selecting the program slot
Any program slot can be selected. It is, however, advisable to select a free program slot,
i.e. one with no program name or channel number.
1. Select the „Storage" line with the button
MEN
2. Enter the memory slot in three digits
with the numerical buttons (04 = pro-
gram 4) or select the program slot with
24
the yellow buttons
25
26
27
3. Press the
28
29
set program data are now stored in this
3O
31
program memory. Exit the menu by
32
pressing the
TV End
and to an „unsharp picture"
+
button. Pay attention to the
–
or the blue buttons
.
button to store. All the
X
button.
TV
You can fine tune a stored station later.
or
First select the program slot. Then call the
„Station search and store" menu. Select the
„Fine" line and set the optimum picture.
The AFC is switched off by changing the
fine tuning!
or
Audi/Video source
. Using the „Search and store" menu, it is
also possible to select a socket and assign
a program slot for audio/video equipment.
This function is described in detail in the
chapter „Connecting other equipment" on
page 40.
21