Loewe CT1163 Operating Instructions Manual page 32

Timer functions and setting on-screen displays
Volume - alarm signal tone:
Select „Alarm volume"
+ –
Adjust alarm volume
Setting end
TV
Switching on-screen display on or off:
Call the menu
MEN
Select „TV setup"
Station
Video
Timer functions
Child lock
Normal settings
TV setup
Factory setup
GB F I E NL DK S
On-screen display
Information
Teletext
Special functions
M
TV Menu off
Select
„On-screen display"
Set display time:
+ –
or 1 to 10 seconds
Sound info on - off:
X
Position of on-screen displays bottom
or top:
Select
X TV
32
Volume - alarm signal tone
If this function is activated, you will be
reminded of „your" appointment by a
continuous alarm signal in addition to the
time being displayed.
Adjusting the volume:
Select „Alarm volume" with the yellow
button .
X
Adjust the volume of the alarm signal with
the or
+
End Setup: Press the
Setting on-screen displays
You can make the following settings with the „TV setup - On-screen displays" menu:
• Determine the duration of the on-screen displays, 1 to 10 seconds.
• Switch the display of all picture and sound functions on or off.
• Switch the information on the station, e.g. stereo, mono, 2-sound or Nicam on or off.
• Select the position of the on-screen displays, bottom or top.
1. Call the menu by pressing the
2. Select the „TV setup" line.
3. Select the „On-screen display" line.
4. Press the
Display time: Select the „Display time"
line, a time between 1 and 10 seconds can
be set with the
Switching picture/sound on and off:
Select the „Picture/sound" line.
Switch the display of the sound or picture
functions off or on with the
MEN
Switching Sound info on-off:
Select the „Sound info" line. Switch sound
info on or off with the
Position bottom - top:
Select the „Position" line. Determine
whether you want the on-screen displays to
appear at the bottom or top of the screen
with the
X
the button.
TV
End
button.
–
button.
TV
button.
MEN
button.
MEN
or button.
+ –
button.
X
button.
X
button. End setup by pressing
If you do not want an alarm signal to remind
you of your appointment, set the volume
to 0.
If you adjust the volume or contrast, for
example, with „Picture/sound off", there will
be no on-screen display of which function is
being adjusted.
With „Sound info off" you will not get any
automatic displays of whether the station is
broadcasting in Stereo, Mono or 2 Sound.