Connecting A Pay-Tv Decoder - Loewe CT1163 Operating Instructions Manual

Connecting a Pay-TV decoder

Call the „Station - Search and store"
menu:
Press briefly
MEN
Auto programming
Station
Search and store
Video
Timer functions
Change name
Child lock
Sort
TV setup
GB F I E NL DK S
Information
Select „Station" line
Select „Search and store" line
Press
MEN
Search and store
Channel V/UHF O8
Frequency 196.25MHz
Fine O
Storage 24
Name TELE5
Norm Auto.-BG
AV Source ---
M
Menu off
TV
Select „AV source"
or Select AV1/Dec or AV1/
Dec!
To „Store"
MEN
End setting
TV
Connecting and setting Pay TV decoder
To set up and connect a Pay-TV decoder, e.g. for Premiere, please see the decoders
instructions for use.
Connect the connecting cable (AV/Scart cable) to the EURO-AV socket 1 on the back of
the TV set. The Pay-TV decoder can also display the subscription information (RGB signals)
through this socket.
Make sure that the decoder is switched on (green pilot lamp on the Premiere decoder)
and the decoder key is inserted.
Select the number of the program on the
TV set at which the Premiere station is
stored. If you can only see a coded picture,
proceed as follows.
1. Call the menu by pressing the
button.
2. Mark the Station line with the blue
button
3. Select the Search and store line with
the yellow button
4. Press the
5. Mark the line AV source —- with the
blue button
---
6. Select the line „AV1/Dec" with the
AV1
yellow buttons
AV1!
AV1/Dec.
decoder applies a 12 V switching
AV1/Dec.!
voltage to the EURO-AV socket. For a
decoder without switching voltage,
select „AV1/Dec.!".
7. Press the
8. Store the settings by pressing the
button.
9. Clear the menu by pressing the
button.
X
MEN
.
.
button.
MEN
.
if the Premiere
key, Store is marked blue.
MEN
X
TV
To record a Premiere program, connect
the video recorder to the 6-pole AV socket
of the Premiere decoder.
The settings are now stored for this
program place, even when you switch the
set off and back on with the on/off switch.
45