Table of Contents
Advertisement
Daily operation of the set – adjusting the sound/mono/stereo, 2 sound
Adjusting treble:
Mark the „Treble" line
–
+
Adjust
Switching from stereo to mono:
Select „Stereo" line
Adjust „Mono !"
–
+
Two sound broadcast, Sound 1 or
Sound 2
Adjust „Sound 2"
–
+
26
Adjusting the treble
Press the Sound functions button
several times to mark <Treble>. Increase
or reduce the treble with the
buttons.
Switching from stereo to mono
The set switches automatically to stereo
when it receives a station with stereo
sound. However, if you still want to listen to
the sound in mono: Press the Sound
functions button
marked. You can switch to <Mono!> with
the
–
Treble
+6
Bass
-3
Mono !
AVC
on
Volume
23
Two sound broadcast
If you switch to a program with two-sound
transmission, <2 Sound> is displayed in
addition to the program name. You can
choose between the main language Sound
1 and the foreign language Sound 2.
Select <Sound 1> by pressing the Sound
functions button
over to <Sound 2> with the
–
Treble
+6
Bass
-3
Sound 2
AVC
on
Volume
23
–
until <Stereo> is
buttons.
+
several times, switch
+
buttons.
„Nicam" sound norm
The TV set must be equipped with a Nicam
decoder in order to receive the Nicam
+
sound norm.
Stations with the „Nicam" sound norm can
be received in England, Belgium, Spain,
Sweden and France. The set switches
automatically to the Nicam norm for Nicam
sound broadcasts.
If the station broadcasts stereo
sound, the display <Stereo> appears, for
two-sound broadcasts <Sound 1> and
for mono broadcasts <Nicam>.
If you want to listen to a stereo
broadcast in mono, e.g. because there is
some interference, switch the sound
function from <Stereo> to <Mono!>.
1. Press the Sound functions button
until <Stereo> is marked in white.
2. Press the buttons
briefly, display <Mono!>. This adjust-
ment is retained until you switch back
over to <Stereo>.
If you want to know whether the station is
broadcasting in Stereo, Mono or 2 Sound,
press the
button briefly. Stereo, Nicam
TV
or 2 Sound appears on the screen next to
the program name. For 2 Sound broad-
casts you can mark the <Sound1> or
<Sound2> line by pressing the
or
and select the desired sound with the
or
–
+
sound functions disappear again
automatically after a few seconds or press
the
button again.
TV
or
–
+
button
buttons. The displayed
Hide quick links:
Advertisement
Table of Contents
