Parental Lock - Loewe CT1163 Operating Instructions Manual

Parental Lock

Set and activate the parental lock
Call the menu
MEN
Select „Parental lock"
Child lock
Lock out adult films
Lock out this programme
Lock out all programmes
Change access code
Select kind of lock
X Switch lock on/off
Enter time, e.g. 22.00 h, for „Lock all
programs from"
2 2 0 0
Activate parental lock:
Select „Change secret code"
Enter/change
1 2 3 4
secret code:
TV
End TV setup
Request the secret code:
Child lock
Access code
1 2 3 4
Enter the secret code
30
You can lock access to the TV set in different ways:
1.Lock adult films which the station provides with a code.
2 Lock individual programs which you choose yourself.
3.Lock all programs and lock all programs after a certain time.
MEN
Set and activate the parental lock
1. Call the menu with the
2. Select the „Parental lock" line with the
blue button
3. Press the
No
4. Select the type of lock with the blue
No
No
button
OOOO
off (No) with the
„Lock adult films"
Only those programs are locked which the
station broadcasts with an appropriate
identification.
„Lock this program"
The program you have just selected is
locked. If you want to lock other individual
programs, select these with
lock each one with
In addition to the possibility of locking all
programs, you can set a time from which all
programs are to be locked. Set the time.
„Change the secret code"
Secret code 0000 is the basic setting. This
means the parental lock is not activated.
Enter your own secret code to activate it.
Operation with the parental lock
activated
After switching on, on reaching the „Lock
time", on receiving „adult films" or on
selecting a locked program, the picture
disappears and the secret code is
requested. If you want to carry on watching
the TV, enter the secret code. If the secret
code is unknown, e.g. to children, the set
switches off after 20 seconds.
button.
MEN
.
button.
MEN
. Switch the lock on (Yes) or
button.
X
and and
P+ P–
.
X
You can set several locks: e.g. „Adult films"
and „certain programs" and „all programs
from"
If „Access code
a code number has already been stored,
you must enter this first or cancel the
secret code.
On the inside back cover of this
manual you will find a code number with
which you can erase a secret code you
have forgotten. Remove the card
immediately and keep it in a safe place.
This code number resets to 0000.
At present, the identification „Adult
film" (VPS) is only used by a few stations
(e.g. RTL). Information on which films are
broadcast with a code can be found in the
teletext of the appropriate station.
Locked programs are displayed in
red in the program table if the parental lock
is activated with the secret code.
In „Lock all programs from", the lock is
active until 6.00 h the next morning.
If you want to clear the set locks, enter
secret code 0000. Remember your secret
code. For safety, you only see four
asterisks on the screen instead of the
secret code.
If you enter the wrong code, a message is
displayed first.
Note: Once the secret code has been
entered, it is not asked for again until
switching off.
" appears,