Communication - ABB M4M 20 User Manual

48 M4M 20 NETWORK ANALYZER USER MANUAL

8.5.Communication

Communication menu allow to set all the parameters related to the communication protocol available
for a specific product version. The embedded communication protocol varies according to the different
product versions. Please refer to "3.3. Versions" for the details on the embedded communication
protocols.
Based on product version following configuration menus are available:
Bluetooth (all M4M 20 product versions)
Bluetooth communication protocol is available on all product version and allow to read data via EPiC
Mobile from M4M and carry out basic configuration.
Menu
Enable/Disable
Start paring
When the Bluetooth communication is enabled, the communication active symbol
When Start pairing is selected, in order to complete the pairing with EPiC Mobile, due to Cybersecurity
reasons it is needed to enter a passkey on your smartphone. The following screen will appear, followed by
a passkey randomly generated by M4M.
→ →
Communication
→ → Communication → Bluetooth
Enable / Disable
Start pairing
Description
Enable / disable bluetooth communication. Disabled by default.
Starts the paring, only if Bluetooth communication is enabled.
Bluetooth
Alarms
Passkey
EPIC
is connected via Bluetooth
appears.
OK