ABB M4M 20 User Manual page 40

40 M4M 20 NETWORK ANALYZER USER MANUAL
Audit log menu
The Audit Log stores an event after an attempt has been made to upgrade the firmware and/or CT ratio,
VT ratio or Type of network is modified.
Each entry contains following data:
Menu
System info
Configuration
Energy
Below you can find the detail of data present for each log entry:
System info
Configuration
Energy
→ → →
Unit Audit log
Description
Where general information about device from the moment of entry
creation is presented.
Where snapshot of CT/VT ratios and Type of network just right after a
successfully performed operation is presented.
Where value of total imported active energy, imported active energy of
L1-L3 as well as total exported active energy from the moment of entry
creation are presented.
Entry num
Timestamp
Upgrade counter
FW Version
TRAFO_V_Prim
TRAFO_V_Sec
TRAFO_I_Prim
TRAFO_I_Sec
TRAFO_IN_Prim
TRAFO_IN_Sec
WIRES
ACTIVE_ENERGY_IMPORT_TOTAL
ACTIVE_ENERGY_IMPORT_L1
ACTIVE_ENERGY_IMPORT_L2
ACTIVE_ENERGY_IMPORT_L3
ACTIVE_ENERGY_IMPORT_TAR1
ACTIVE_ENERGY_IMPORT_TAR2
ACTIVE_ENERGY_IMPORT_TAR3
ACTIVE_ENERGY_IMPORT_TAR4
ACTIVE_ENERGY_IMPORT_TAR5
ACTIVE_ENERGY_IMPORT_TAR6
ACTIVE_ENERGY_EXPORT_TOTAL