First Commissioning; Setting Language; Password For The First Use - ABB M4M 20 User Manual

30 M4M 20 NETWORK ANALYZER USER MANUAL

7.First commissioning

At first power up of M4M network analyzers, wizard procedure will guide the user in the first
commissioning steps:
1. Set the language (please refer to chapter "7.1.Setting language")
2. Set a password (please refer to chapter "7.2.Password for the first use")
3. Set the date and time on the device (please refer to chapter "7.3.Date and time")
4. Set the type of network (please refer to chapter "7.4.Type of network")
5. Set the CT ratio (please refer to chapter "7.5.CT ratio")
6. Set the VT ratio (please refer to chapter "7.6.VT ratio")
7. M4M 20-M (MID): Set the Lock (please

7.1.Setting language

It is possible to change the display language to one of the languages present in the device.
1. Use
2. Press

7.2.Password for the first use

A password can be set by the user to protect the Configuration menu and avoid any unwanted
modification to the device settings.
3
In order to disable the password, please set the new password as 00000.
The password can be changed in any moment in Configurations -> Unit -> Modify password (please refer to
chapter "8.1.Unit").
M4M 20-M (MID): It is not possible to disable password. Password only protects non-critical configurations.
Critical configurations are protected by Lock
→ → →
Unit Language
to scroll the list on of values or fields.
to confirm or to cancel the modification.
ENTER BACK
refer to chapter "7.7.Lock MID version")
1. At the first use it is mandatory to define a
password. The password is composed by 5
numerical characters.
2. In order to select each numerical character, it
is necessary to use
3. Press
ENTER
modification.
2
(please refer to chapter "7.7.Lock MID
.
to confirm or to cancel the
BACK
version")