I/O; Notifications - ABB M4M 20 User Manual

60 M4M 20 NETWORK ANALYZER USER MANUAL

9.7.I/O

The number and type of I/O on the M4M network analyzer varies according to the different product
versions. Please refer to the table in "3.4.Versions" for the detail of I/O types per each M4M.
For each I/O specific information is shown according to the I/O type. Below an example for digital output
set as pulse output
Info visualized
Type
Count
State

9.8.Notifications

Menu item
All
Alarms
Warnings
Errors
→ →
Data Reading
Data Reading
→ →
Notifications
Data Reading
All
Alarms
Warnings
Errors
→
I/O
I/O
Slot 1
Type Pulse output
1321
Count
Description
How I/O slot has been configured.
Number of pulses counted by the I/O. It is only available
if the I/O slot has been configured as Pulse input or Pulse
output.
Status of the I/O. It is only available if the I/O slot has
been configured as Pulse Output, Output ON, Output OFF
or Comm. output.
Notifications
Description
All alarms, warnings, errors displayed in chronological order
(latest first).
User settable, related to specific parameters, threshold,
etc.
Related to installation conditions and device settings.
Related to the device and to its self-diagnostics.