Before Calibration Adjustment; Maintenance Mode - Fluke v3001 FC Calibration Manual

Before Calibration Adjustment

Before the Product calibration can be adjusted, you must go through the
maintenance mode menu and enter your password.

Maintenance Mode

The Product maintenance mode can be used to set different parameters on the
Product that include auto power off, backlight adjustment, and calibration. To use
the maintenance mode:
1. With the Product on, push and hold .
2. Push . Keep  pushed until all the display segments are shown.
3. Release  and .
The Product is now in maintenance mode.
Figure 2. Performance Test Connections
Wireless DC Voltage
Before Calibration Adjustment
hcc07.eps
7