Instrument Cluster Descriptions; Instrument Cluster Display - Jeep GRAND CHEROKEE L 2021 Owner's Manual

92 GETTING TO KNOW YOUR INSTRUMENT PANEL
I C D
NSTRUMENT LUSTER ESCRIPTIONS
1. Tachometer
Indicates the engine speed in revolutions

per minute (RPM x 1000).
2. Speedometer
Indicates vehicle speed.

3. Temperature Gauge
The temperature gauge shows engine

coolant temperature. Any reading within the
normal range indicates that the engine
cooling system is operating satisfactorily.
The pointer will likely indicate a higher

temperature when driving in hot weather,
up mountain grades, or when towing a
trailer. It should not be allowed to exceed
the upper limits of the normal operating
range.
WARNING!
A hot engine cooling system is dangerous. You or
others could be badly burned by steam or boiling
coolant. It is recommended to call an authorized
dealer for service if your vehicle overheats
page 316.
Ú
CAUTION!
Driving with a hot engine cooling system could
damage your vehicle. If the temperature gauge
reads "H" pull over and stop the vehicle. Idle the
vehicle with the air conditioner turned off until
the pointer drops back into the normal range. If
the pointer remains on the "H", turn the engine
off immediately and call an authorized dealer for
service.
4. Fuel Gauge
The pointer shows the level of fuel in the

fuel tank when the Keyless Push Button
Ignition is in the ON/RUN position.
The fuel pump symbol points to

the side of the vehicle where the
fuel door is located.
NOTE:
The Instrument Cluster Warning Indicators will illu-
minate briefly for a bulb check when the ignition is
first cycled.

INSTRUMENT CLUSTER DISPLAY

Your vehicle will be equipped with an instrument
cluster display, which offers useful information to
the driver. With the ignition in the OFF mode,
opening/closing of a door will activate the display
for viewing, and display the total miles, or
kilometers, in the odometer. Your instrument
cluster display is designed to display important
information about your vehicle's systems and
features. Using a driver interactive display located
on the instrument panel, your instrument cluster
display can show you how systems are working and
give you warnings when they are not. The steering
wheel mounted controls allow you to scroll through
the main menus and submenus. You can access
the specific information you want and make
selections and adjustments.