When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow



water to get into the power distribution center and possibly result in an electrical system failure.

When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may



result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected.

Cartridge Fuse

* If Equipped

–

20 Amp Yellow

–

20 Amp Blue

Micro Fuse

Module Seat Heater Frt (PASS)*

10 Amp Red

SW Seat Heater (RR RT - RR LT)*

–

Spare