Programming Flip&Click; Using Flip&Click With Arduino Ide - mikroElektronika Flip&Click PIC32MZ Manual

2. Programing Flip&Click PIC32MZ
Using Flip&Click with Arduino IDE (chipKIT core)
1) Plug in Flip&Click PIC32MZ (use the USB-UART port between C and D socket).
2) Launch Arduino IDE
3) From within the Arduino IDE, go to File->Preferences dialog box. Look at the text entry field called
"Additional Boards Manager URLs:" .If that text entry field is blank, then you can just copy/paste the following
URL into that text field
.Then click OK to close the Preferences dialog box.
4) If that field is not blank, then click the little box icon to the right of the text field, and copy/paste the
URL https://github.com/chipKIT32/chipKIT-core/raw/master/package_chipkit_index.json
the text entry field. Arduino lets you have as many different cores as you want loaded into the IDE as long as
each URL is on a separate line. Click OK to close the Additional Boards Manager URLs dialog box and then click
OK again to close the Preferences dialog box.
https://github.com/chipKIT32/chipKIT-core/raw/master/package_chipkit_index.json
Page 6
onto the next line of