Use And Maintenance - Eico AIDA Manual

off function after 10 minutes, the led flashes slowly .
> Two buttons + and - for increasing and reducing the motor speed. At the 4th motor speed (intense) the led flashes
quickly and after 5 minutes the 2nd speed is automatically set.
DIGITAL CONTROLS \ TOUCH CONTROLS (Fig. 3)
In this version there are five soft touch buttons and a display
> One button for turning the lights on and off.
> One button for turning on at 2nd speed and for turning the motor off.
> Two buttons + and - for increasing and decreasing the motor speed. At the 4th motor speed (intense) the number
on the display flashes and after 5 minutes the 2nd speed is automatically set.
> A TIMER button for turning the motor off after 10 minutes. When the timer is activated, the number on the display
flashes.
Special functions:
After 100 hours use, a 0 or a letter A will start flashing on the DISPLAY to remind the user to clean the metal filters.
After washing the metal filters, reset the hour meter by pressing the TIMER button for more than three seconds with
the hood turned off. When the hour meter has been reset a dash appears on the display, with the hood turned off.
RADIO- CONTROL (Fig. 4)
The button ON/OFF on the hood turn on simultaneously lights and the motor at the second speed or it turns off every-
thing. After 100 working hours of the suction motor the red led will start to flash indicating the need to wash metals
filters. To cancel the filters alarm, when the suction motor is switched off, you must press button ON/OFF long
enough.
Radio control:
At the first use it is necessary to start remote control learning. With the hood turned off, keep button "ON/
OFF" (DISTANTE - CEILING STRIPE) or button "+" (AIDA) for 3-8 sec. The remote control learning is indicated with the
flashing alarm filters led. If within one minute arrive a valid remote control code (sent by pressing any button of the
remote control ) the led will be on continuously for 3 seconds and then it will turn off, indicating the proper learning.
Control buttons:
> One button for turning the lights on and off.
> One button for turning on at 2nd speed and for turning the motor off.
> Two buttons + and - for increasing and decreasing the motor speed. At the 4th motor speed (intense) the led flash-
es and after 5 minutes the 2nd speed is automatically set.
> A TIMER button for turning the motor off after 10 minutes.

USE AND MAINTENANCE

Before beginning any sort of cleaning or maintenance work, turn power off to the hood by turning the main
switch to 0 (OFF).
Changing the light bulbs
12V halogen G4 attachment: Use a screwdriver to unscrew the glass support ring (Fig. 5). Remove the glass and chan-
ge the light bulb with another identical. Replace the protective glass and screw back the ring. The light bulbs can be
purchased in any electrical supply shop.
Dichroic lamp G4 attachment: Use a screwdriver to remove and change the dichroic lamp with another identical (Fig.
6).
LED spotlight replacement should only be carried out by qualified technicians using only original spare parts.
EN - 19