Connecting To The Emulator; Connecting To The E6000 Emulator - Renesas E6000 User Manual

3.2

Connecting to the Emulator

Observe the precautions listed below. Failure to do so
will result in a FIRE HAZARD and will damage the PC card
interface, the host computer, and the emulator product or will
result in PERSONAL INJURY. The USER PROGRAM will be
LOST.
1. Always switch OFF the emulator and host computer before
connecting or disconnecting any CABLES, CARDS, or PARTS.
2. Always before connecting the interface cable to the emulator
product, make sure that the connectors on both sides are
correctly aligned.
3.2.1

Connecting to the E6000 Emulator

When using the E6000 emulator, use the interface cable supplied together with the PC card
interface, and connect the PC card interface to the E6000 emulator station through the interface
cable as shown in figure 2.
4
WARNING
Figure 2 Connecting to E6000 Emulator