Advertisement
INSTALLATION INSTRUCTIONS
2967 – RESIDUE MANAGER
STEP 1.
Build half of the row cleaner wheel assemblies as left hand wheel assemblies and half
as right hand wheel assemblies. This is determined by which side of the wheel support and in
which hole the wheel assembly is installed.
NOTE: Assemble one wheel as a right hand wheel rotation and one wheel as a left
hand wheel rotation.
STEP 2. Choose the mounting hole in which to attach the R.M. wheels. Attach the R.M.
wheels/hub/shield assemblies to the 2967-262 stem adjustment bracket using 5/8" lock
washers and hex nuts. Adjust the bearing shield to top dead center, rotate slightly
forward. Torque to 150 ft./lbs.
6
Advertisement
