Table of Contents
Advertisement
Lock the head support adjustment in place again. The head support must be
set so that the shoulder belt is at shoulder height of the baby or slightly above
(fig. 15/no. 1).
Fig.15
correct
Make sure that the belts are never twisted.
5.2 Buckling up the baby
Please make sure that your baby is always wearing a seat belt in the seat
pan. That also means outside of the vehicle.
Loosen the shoulder belt as described in section 5.1.1. Open the buckle by
pressing the red button.
Fig.16
Place the child in the seat pan and
then guide the shoulder belt over
your baby's shoulder (fig.16/no.1).
incorrect, too high
Fig.17
Feed the latches of the shoulder belt
(fig.17/no.2) together into the buckle.
12
ENG
incorrect, too low
Advertisement
Table of Contents
