SImx TUTOKO LHT1146 Installation Instructions

INSTALLATION INSTRUCTIONS
TUTOKO
2 x 6W LED UP/DOWN LIGHT
LHT1146 ANTHRACITE
The Simx Lighting Tutoko up/down lights and downlights are contemporary designs with high quality
LED arrays. Water and dustproof, they are rated for installation in exposed exterior locations.
TECHNICAL SPECIFICATIONS
Power Supply
Lumens
LED Colour
IP Rating
Safety
Mounting
Construction
Specifications are subject to change without notice
BEFORE YOU START
Please read all the instructions prior to installation.
• The Tutoko light should be wired to its own light switch.
• Do not connect non-LED lamps on the same switch.
• An earth connection must be used for electrical safety.
• For all locations, please check that the direction of the beam will not cause undue glare to neighbouring
properties.
!
IMPORTANT
This product is suitable for use only with a supply voltage of 220-240V AC.
All electrical work must be carried out in accordance with local and national electrical codes as
applicable. We strongly recommend that this light fitting is installed by a registered electrician.
Always switch power off prior to installation. A means of mains power isolation must be installed in
the circuit for the purpose of safe access for any internal cleaning, recalibration, or maintenance.
This light fitting is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety. Young children
should be supervised to ensure that they do not play with the appliance.
Any changes or modifications made or attempted to this product, without the prior written approval
of the manufacturer, will void any and all stated warranties.
TUTOKO
1 x 7W LED DOWNLIGHT
LHT1145 ANTHRACITE
220-240V AC
2 x 6W: 950 lumens
1 x 7W: 500 lumens
Warm White 3000K
IP65
Class I
Wall
Powder coated aluminium/tempered glass