Mapping; Starting The System - Taski swingoBot 2000 Safety Instruction

Dosing:
Attention:
Wear gloves, goggles and appropriate
(protective) working clothes when han-
dling chemical products!
Notice:
Use chemical products recommended by
Diversey only and always observe the
product information.
Caution:
Using unsuitable products (e.g. products
containing chlorine, acids or solvents) may
cause harm to health and severe damage
to the machine.
Notice:
An automatic dosage (IntelliDose) is inte-
grated into this machine. You can find out
how to exactly operate the IntelliDose in
the corresponding instructions of use.
Notice:
Diversey recommends a sustainable work-
ing by determination of the correct product
dosing quantity. Overdosing or underdos-
ing will lead to unsatisfactory cleaning re-
sults.
Pre-cleaning
Attention:
Remove any objects (wooden, metal parts
etc.) from the cleaning surface.
The objects could be catapulted by the ro
tating tool, and thereby cause injuries to
people and damage to the environment.

Mapping

Notice:
You can find the exact details and descrip-
tions in the mapping handbook.

Starting the system

• Switch the machine on. Hold down the main switch button
for two seconds.
Notice:
It takes approximately 2 minutes for the
machine to fully power up
• Touch the LOG IN button.
LOG IN
• Enter your operator code and touch
OK.
1 2 3
4 5 6
7 8 9
0
OK
• The Prep Step Guide will appear.
• Move to the Home Screen by touch-
ing OK.
OK
• To access the Functions screen,
touch the right arrow.
-
EN
35