Dlci Mapping/Ipx Map - ADTRAN Express L768 Owner's Manual

IP Map/RIP Direction
Write security: 3, Read security: 5
This parameter allows the direction at which RIP advertisements are
sent and listened to be specified.
Tx and Rx (def) RIP advertisements are periodically trans-
Tx Only
Rx Only
IP Map/NAT
The Express L768 can perform Network Address Translation over a
PVC. Setting this option to On will cause the Express L768 to translate
between the Ethernet addresses and the configured Link IP Address.
Only one PVC may be used for translation at one time. If more than
one IP Map is configured for NAT, the first PVC which is activated be-
comes the NAT port.

DLCI Mapping/IPX Map

This menu represents the IPX protocol mapping that is to take place
for this DLCI.
IPX Map/Active
Write security: 3, Read security: 5
When this is set to Yes (def), the Express L768 will attempt to transport
IPX packets for this DLCI. A setting of No means that no IPX traffic or
route will be exchanged.
61203192L1-20
Chapter 3. Terminal Menu Operation and Structure
mitted and are listened to on this virtual cir-
cuit.
RIP advertisements are periodically trans-
mitted but are not listened to on this virtual
circuit.
RIP is not transmitted on this virtual circuit
but they are listened to.
Express L768 User Manual 3-41