Table of Contents
Advertisement
Chapter 3. Terminal Menu Operation and Structure
WAN IPX Bridge/Frame Type
Write security: 2; Read security: 5
This is the frame type used for the virtual Ethernet port. See IPX/
Frame Type on page 3-20 for an explanation of the IPX frame type.
WAN IPX Bridge/Seed Status
Write security: 2; Read security: 5
This is the seed status used for the virtual Ethernet port. See IPX/Seed
Status on page 3-20 menu for an explanation of the IPX seed status.
WAN IPX Bridge/Triggered
Write security: 2; Read security: 5
When set to Yes, only IPX RIP and SAP updates are sent when the
routing or service table has changed. When set to No (def), updates
are sent periodically.
RIP and SAP periodic rates set for the Ethernet port (see IPX/
RIP Timer on page 3-21 and IPX/SAP Timer on page 3-21) are
used for the WAN IPX bridge port.
»» Bridge/Spanning Tree
The Spanning Tree Algorithm and Protocol ensures a loop-free topol-
ogy and provides redundancy. The protocol parameters can be spe-
cifically tuned from their defaults, though most applications require
no adjustment.
Spanning Tree/Mode
Write security: 2; Read security: 5
When the mode is set to On, the Express L768 will participate in the
Spanning Tree protocol between other bridges. When Off (def), all
bridge ports remain permanently open for forwarding.
3-24
Express L768 User Manual
61203192L1-20
Advertisement
Table of Contents
