GEM 566 Series Operating Instructions Manual page 39

12.4.27 Calibration positions
The values of the factory calibration can be read out with the Calibration positions parameter.
The values are analog values of the potentiometer in the mechanical end positions of the actuator.
Index Sub- Off- Access
In- set Rights
dex
0x55 1 0 RO
2 16 RO
Description of parameter values
Index name
Calibration positions
12.4.28 Analog values
Different analog values can be read out with the Analog values parameter.
Index Sub- Off- Access
Index set Rights
0x60 1 0 RO
2 16 RO
3 32 RO
4 48 RO
Description of parameter values
Index name
Analog values
www.gemu-group.com
Length Index name
12 bits Calibration
positions
12 bits
Parameter Values
Max. 0 ... 4092
Min. 0 ... 4092
Length Index name
12 bits Analog values
12 bits
12 bits
12 bits
Parameter Values
Potentiometer 0 ... 4095
Supply voltage 0 ... 4095
Temperature 0 ... 4095
Set value (W) 0 ... 4095
Parameter Type
Max. uint:16
Min. uint:16
Read out analog value of the potentiometer for the mechan-
ical end position OPEN.
Read out analog value of the potentiometer for the mechan-
ical end position CLOSED.
Parameter
Potentiometer
Supply voltage
Temperature
Set value (W)
Read out current analog value of the potentiometer.
Read out current analog value of the supply voltage.
Read out current analog value of the temperature sensor.
Read out current analog value of the set value.
39 / 57
12 Specific data IO-Link (pin 6)
Default Values
0 0 ... 4092
4092 0 ... 4092
Description
Type Values
uint:16 0 ... 4095
uint:16 0 ... 4095
uint:16 0 ... 4095
uint:16 0 ... 4095
Description
GEMÜ 566
Code S0