GEM 566 Series Operating Instructions Manual page 25

Index Sub- Access
Index rights
0x4F 1 R/W
2 R/W
0x50 1 R/W
2 R/W
3 R/W
4 R/W
0x51 1 R/W
2 R/W
3 RO
4 RO
0x53 1 RO
2 RO
3 RO
0x55 1 RO
2 RO
0x60 1 RO
2 RO
3 RO
4 RO
0x62 1 RO
2 RO
0x90 2 R/W
www.gemu-group.com
Index name
Error action Error action
Basic settings Inversion of LED col-
On site initialization
Operating mode
IO-Link process data Activate/deactivate
Actuator position Open request
feedback
Close request
Initialized positions
Calibrated positions
Analog values Potentiometer
Supply voltage
Temperature
Set value (W)
Operating times
Drive sets
Parameter Function
Set safety position
Error time Determine time
from error detection
to error message
Activate / deactiv-
ours ate inversion of
LEDs
Activate / deactiv-
ate on site initializa-
tion
Operating mode
change-over (posi-
tioner; ON/OFF)
use of IO-Link pro-
cess data
Request valve posi-
tion OPEN
Request valve posi-
tion CLOSED
Open real Real valve position
OPEN
Close real Real valve position
CLOSED
Open Analog value valve
position OPEN
Close Analogue value
valve position
CLOSED
Stroke Read out the analog
value for stroke (dif-
ference between
OPEN and CLOSED).
Max. OPEN end position
Min. CLOSED end posi-
tion
Analog value poten-
tiometer
Analog value supply
voltage
Analog value tem-
perature sensor
Analog value set
value signal
Open Operating time
OPEN
Close Operating time
CLOSE
Force Force, dependent on
valve used
25 / 57
12 Specific data IO-Link (pin 6)
Factory Setting options
settings
2 0 → Hold
1 → Open
2 → Close
1 (0.1s) 1 ... 1000
(0.1s ... 100s)
0 0 → Standard
1 → Inversed
0 0 → Enabled
1 → Disabled
0 0 → Positioner
1 → On/Off
0 0 → Disabled
1 → Enabled
900 30 ... 970
(90.0%) (3.0 ... 97.0%)
100 30 ... 970
(10.0%) (3.0 ... 97.0%)
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 ... 4095
0 0 to 255
(0 to 25.5s)
0 0 to 255
(0 to 25.5s)
1 ... 6
GEMÜ 566
Code S0