Table of Contents
Advertisement
The flight case features a replaceable fuse. To replace, disconnect the flight case from the power
source, then use a screw driver to unscrew the fuse holder located beside the power ports. Remove
the bad fuse and replace with a new one, then screw the fuse holder back in. Replace only with a
new fuse of the same type and rating.
Following any software update, the battery life information setting must be reset before it will display
accurate information. This can be done by following the steps below:
1. Navigate to Battery > Operation Mode in the system menu and make sure that the device is set to
either Standard 6 or Saver 10.
2. Navigate to Battery > Current Life in the system menu.
3. Press and hold the UP button until the device flashes amber once. The device should now display
an accurate battery life reading.
ADJ Products, LLC - www.adj.com - Mirage Q6 Pak User Manual Page 38
FUSE REPLACEMENT
BATTERY LIFE
Hide quick links:
Advertisement
Table of Contents
