In-Case Charging - ADJ MIRAGE Q6 PAK User Manual

1. Lock the wheel casters by pressing down on
the levers located near each caster.
3. Place an ADJ Mirage Q IP device in any of the device slots in the flight case. Up to 6 devices can
be accommodated. The charge indicator located beside the power ports will illuminate to indicate
that your device is charging. It is strongly recommended to leave the case lid open during
charging.
ADJ Products, LLC - www.adj.com - Mirage Q6 Pak User Manual Page 14

IN-CASE CHARGING

2. Connect power cables to both the power in
and power out ports, if desired. Please refer
to the Daisy Chain Power Linkage section
of this manual for details.