Please turn off all electrical products when they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power when not in use. Thank you! ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 26...
R.A. number on the outside of the package will be returned to the shipper. ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 3 ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 24...
If the entire instrument is sent, it must be shipped in it’s original package. No accessories should be serviceable parts inside. shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.
Figure 1 remember that DMX cable must be daisy chained and cannot be split. ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 5 ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 22...
Pin 3 Pin 3 Not Used Do Not Use Not Used Do Not Use ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 21 ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 6...
UP, “SJ-X” should be displayed. Use the UP or DOWN buttons to adjust the sensitivity. “SJ-1” is the least sensitive, “SJ-8” is the ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 7 ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 20...
Page 9
SOUND ACTIVE MODE 2 4. When “b.XXX” is displayed you are in Blue dimming mode. Press the ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 19 ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 8...
Page 10
COLOR CHANGE 4 To run the 8 Channel Mode, press the MODE button until “Ch.08” ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 9 ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 18...
Page 11
This function is used to activate and deactivate the infrared receiver. When this function is activated you can control the fixture using the ADJ used. LED RC 2 (Remote Control). Please see the next page for ADJ LED RC 2 Flat Par QA12XS 7 Channel Mode controls and functions.
Page 13
0 - 15 troller at the front of the fixture and be no more the 30 feet away. To 16 - 31 use the ADJ LED RC 2 you must first activate the fixtures infrared re- 32 - 47 GREEN ceiver, to activate the receiver please see the instructions on page 10.
Page 14
Note: When setting the DMX address, each time a number is pressed a LED color will glow, when you have set the DMX address correctly ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 13 ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 14...
Need help?
Do you have a question about the 1226100300 and is the answer not in the manual?
Questions and answers