Progress PAI8000E User Manual page 21

Power Management
The cooking zones of the cooking surface
have a maximum power available to them.
Two cooking zones make up a pair (see fig-
ure).
So that the Power function can always be
carried out, Power Management may reduce
the power of the other cooking zone in the
pair
Example: heat setting 9 is selected on a
cooking zone. The Power function is switch-
ed on for the cooking zone paired up with it.
The Power function is performed, but heat
setting 9 on one cooking zone and Power
function on the other cooking zone of a pair
exceeds the maximum output for both.
Therefore Power Management reduces the
first cooking zone that was switched on from
9 to 7, for example, and the display for this
cooking zone alternates between 9 and 7
and then remains on the current maximum of
Using the timer
All cooking zones can use each use one of
the two timer functions at the same time.
Function
Automatic cut-out
Countdown timer
If a cooking zone is switched off, the tim-
er function set is also switched off.
If a heat setting is set on this cooking
zone in addition to a countdown timer,
Selecting a cooking zone
Ste Control panel
p
1. Touch once
2. Touch once
3. Touch once
4. Touch once
Condition
a heat setting is set
cooking zones not in use
Pilot light of the first cooking zone flashes
Pilot light of the second cooking zone flashes
Pilot light of the third cooking zone flashes
Pilot light of the fourth cooking zone flashes
7. (Whether the display alternates between 9
and 7 or 9 and 6 or other values, depends on
the appliance type and the size of the cook-
ing zone.)
Outcome after the time has
acoustic signal
zone switches off
acoustic signal
the cooking zone is switched off after the
time set has elapsed.
Display
progress 21
elapsed
00
flashes Cooking
00
flashes