Changing The Ip Address; Novabackup - Buffalo TeraStation WSS 5000R2 User Manual

Changing the IP Address

1
Click the
2
Click the TeraStation icon while holding down the control key, then choose Configure - IP Address.
3
Clear the "Use DHCP" checkbox; enter the desired settings and the administrator password, then click Apply.

NovaBACKUP

NovaBACKUP is a Windows utility that lets you back up the data on your computer.
The NovaBACKUP installer is available from either http://d.buffalo.jp/WS5000R2/ for the WS5000R2 series and
http://d.buffalo.jp/WS5000N2/ for the WS5000N2 series. Select the region and model to go to your specific model's
d.buffalo website. Download the NovaBACKUP installer and install it onto your computer.
To download the installer, you will need the serial number of your TeraStation. The serial number is printed on the
label on the back or top of the unit. For the rackmount model, the serial number is located on the front as well. Refer
to the "Diagrams" section in chapter 1 for information on where to find the serial number.
icon in the Dock to start NAS Navigator2.
103