Connection
LinkStation
Jumbo Frame
Jumbo Frame
Compatible Hub
LinkStation
Jumbo Frame
Jumbo Frame
Compatible Hub
LinkStation
Jumbo Frame
Jumbo Frame
Incompatible Hub
LinkStation
Jumbo Frame
Jumbo Frame
Incompatible Hub
Changing the IP Address
Normally, the LinkStation's IP address is set automatically from a DHCP server on your network. If you prefer, you can
set it manually. An easy way to do this is to change it from NAS Navigator2 running on a computer connected to the
same router (subnet) as the LinkStation. The procedure to change the IP address in Settings is below.
1
In Advanced Settings, click Network.
2
Click
to the right of "IP Address".
3
Click the LAN port where the IP address will be changed.
Jumbo Frame
Compatible PC
Jumbo Frame
Incompatible PC
Jumbo Frame
Incompatible PC
Jumbo Frame
Compatible PC
114
Transmission
Transfer data in
jumbo frames.
Transfer data not
using jumbo
frames.
Transfer data not
using jumbo
frames.
Any data cannot be
transferred.