Table of Contents
Advertisement
7
Swing the lock back down until it clicks into place.
8
Close the front cover with the included key. Press the power button on the TeraStation to turn it on.
Note: If drive 1 is being replaced, the red error LED will light up and "POST ERR: 00D9 Boot from HDD x" will be
displayed on the LCD panel. Wait for the unit to reboot. When the reboot is finished, go on to the next step.
9
Double-click the
10
Right-click on your TeraStation's icon and click Open Remote Desktop. For Mac, click the TeraStation icon while
holding down the control key and click Open Remote Desktop.
icon to start NAS Navigator2.
31
Advertisement
Table of Contents
