Changing The Ip Address - Buffalo LinkStation 200B User Manual

Chapter 8 Advanced Features
Jumbo Frame
Jumbo Frame
Jumbo Frame
Jumbo Frame

Changing the IP Address

Normally, the LinkStation's IP address is set automatically from a DHCP server on your network. If you prefer, you can
set it manually. An easy way to do this is to change it on NAS Navigator2 running on a computer connected to the
same router (subnet) as the LinkStation. The procedure to change the IP address in Settings is below.
1
From Advanced Settings, click Network.
2
Click to the right of "IP Address".
3
Click the LAN port where the IP address will be changed.
Connection
Jumbo Frame
Compatible Switch
Jumbo Frame
Compatible Switch
Jumbo Frame
Incompatible Switch
Jumbo Frame
Incompatible Switch
Jumbo Frame
Compatible PC
Jumbo Frame
Incompatible PC
Jumbo Frame
Incompatible PC
Jumbo Frame
Compatible PC
85
Transmission
Transfer data using
jumbo frames.
Transfer data
without using
jumbo frames.
Transfer data
without using
jumbo frames.
No data can be
transferred.