Table of Contents
Advertisement
16
When the "Initialize Disk" window appears, click OK.
17
Right-click the initialized hard drive and select Convert to Dynamic Disk. A RAID volume cannot be built unless
the hard drive is converted to a dynamic disk.
18
Select the step depending on your reason for a created volume.
To create a new volume (except for a RAID 5 or mirrored volume):
(1) Right-click the new dynamic disk and select New Volume.
(2) Follow the instructions on the screen to create a new volume.
To repair a RAID 5 volume:
(1) Right-click the volume labeled "Failed Redundancy" and click Repair Volume.
(2) When "Select one of the disks listed below. " is displayed, select the drive to repair and click Yes.
Perform steps (1) and (2) for each volume that requires RAID resynchronization.
(3) Right-click the volume labeled "Missing" and select Remove Disk.
37
Advertisement
Table of Contents
