Table of Contents
Advertisement
RAID Mode
Local Security Policy
Specifications
Check the Buffalo website for information about the latest products and specifications.
Installed System
LAN Interface
USB Interface
Other Interfaces
Internal Hard Drives
Drive C: A mirrored volume using drives 1 and 2
Drive D: A RAID 5 volume using all drives
*WS5200DN2 and WS5200DR2: Drive D is a mirrored volume
using drives 1 and 2.
"Password must meet complexity requirements" is disabled by
default.
Workgroup Edition Model:
Microsoft Windows Storage Server 2012 R2 Workgroup Edition
Standard Edition Model:
Microsoft Windows Storage Server 2012 R2 Standard Edition
Note: The Microsoft Software License is on the d.buffalo website,
http://d.buffalo.jp/WS5000R2/ for the WS5000R2 series and
http://d.buffalo.jp/WS5000N2/ for the WS5000N2 series. Be sure to read the terms
and conditions of this license.
Standards Compliance
Data Transfer Rates
Number of Ports
Connector Type
Standards Compliance
Data Transfer Rates
Number of Ports
Connector Type
1 x D-sub 9 pin (male) port
Number of Drive Bays
Drive Interface
Replacement Drive
IEEE 802.3ab (1000BASE-T), IEEE 802.3u (100BASE-
TX), IEEE 802.3 (10BASE-T)
10/100/1000 Mbps (auto-sensing)
2
RJ-45 8-pin (auto MDI-X)
USB 3.0/2.0
USB 3.0: Max. 5 Gbps
USB 2.0: Max. 480 Mbps
WS5200DN2, WS5200DR2, WS5400DN2,
WS5400DR2: 2 x USB 2.0, 2 x USB 3.0
WS5400RN2, WS5400RR2, WS5600DN2, WS5600DR2:
2 x USB 2.0, 3 x USB 3.0
Type A
WS5200DN2, WS5200DR2: 2
WS5400DN2, WS5400DR2, WS5400RN2, WS5400RR2:
4
WS5600DN2, WS5600DR2: 6
SATA 3 Gbps
WS5200DR2, WS5400DR2, WS5400RR2, WS5600DR2:
Buffalo OP-HDS series drive
WS5200DN2, WS5400DN2, WS5400RN2,
WS5600DN2: Buffalo OP-HDN2 or OP-HDWR series
drive
Note: The new drive should be the same size as
the replacement drive. The drives listed above are
available from the Buffalo website.
106
*
Advertisement
Table of Contents
