Buffalo TeraStation WSS 5000R2 User Manual page 96

5
Select the importance level from the "Log Level" list.
6
Select "Application" from the "Log Type" list.
7
Enter "Replication" into the "Source" box.
8
Enter an event ID referring to the table below.
Event IDs
Event ID Type
1001 Warning
1002 Warning
1008 Warning
1009 Warning
1032 Warning
1033 Warning
3001 Warning
3002 Warning
9
Click OK.
10
Repeat steps 4 through 9 for the number of events to be added.
11
Click New.
12
Select the importance level from the "Log Level" list.
13
Select "Application" from the "Log Type" list.
14
Enter "TeraSync" into the "Source" box.
15
Enter an event ID referring to the table below.
Event IDs
Event ID Type
1001 Warning
1002 Warning
16
Click OK.
17
Repeat steps 11 through 16 for the number of events to be added.
18
Click OK, then click OK again.
19
Enter the password of the user you're logged in as and click OK.
Description
Files in the replication source were deleted so they could not be sent to the
replication target.
Files in the replication source were locked so they could not be sent to the
replication target.
Could not read the replication log file. Devices for which replication failed could
not be clarified.
Replication failed.
The replication log file was corrupted.
An unexpected modification was made to the replication log file.
The folder path to the replication target does not exist.
A folder that is not configured as a replication target is queued.
Description
Files in the replication source were deleted so they could not be sent to the
replication target.
Files in the replication source were locked so they could not be sent to the
replication target.
95