Table of Contents
Advertisement
TIME DELAY function
Use this function to finish laundry at a desired time.
Please note first!
e.g.: It is 1 pm and you want to finish the laundry by 7 pm,
(7 pm – 1 pm = 6 hours)
The initial hour when the TIME DELAY button is pressed is 3:00. Each press of the button will increase an hour.
1
Press the
POWER
button.
Load the laundry and close the
door.
Add detergent and fabric softener
and then close the dispenser
drawer.
Refer to page 10 for the amount
of detergent.
TIME DELAY is settable from 3 to 19 hours and NOT settable within 3 hours.
The actual finishing time may be different depending on the water pressure and temperature.
Please note!
Pressing the TIME DELAY button increases an hour.
TUB light function
TUB light is on when the POWER button is pressed, and off when the door is closed and the START/PAUSE button is pressed
to start the washer.
The washing machine is automatically turned off with the light off after a certain time from the end of washing.
2
Dial the Course Selector
Knob for the desired
course.
You may change the water temperature,
number of rinse cycles and spin speed
by pressing the buttons accordingly.
3
Press the TIME DELAY
button and select the
time to finish.
TIME DELAY light is on and
is displayed.
Keep pressing the TIME DELAY
button until the hours
from
now to finish the laundry.
4
Press the
START/PAUSE
button.
The laundry is finished after the
set hour.
To cancel the TIME DELAY,
press the Power button.
Hide quick links:
Advertisement
Table of Contents
