Child Lock Function - LG TROMM F4999NTNH User Manual

CHILD LOCK function

Use of this function is to prevent accidents that are caused by children's use of the machine.
To change the course or cycle when the CHILD LOCK is already set
1 2
Disable the Press the
CHILD LOCK START/
by pressing PAUSE
the WASH and button to
RINSE buttons stop the
simultaneously operation.
for 3 seconds.
 You may set or clear during the operation
 Once the CHILD LOCK function is set, all other buttons except the POWER button are inactivated.
 Even after the end of every cycle, the CHILD LOCK is not automatically unlocked. To unlock, the WASH and RINSE buttons have to be
pressed and held for 3 seconds.
When the POWER is on while the CHILD LOCK has already been set
1
If the POWER is on while the
CHILD LOCK has already been
set, [ ] is ON.
3
Select a course
or function
to change,
and press the
START/PAUSE
To set the CHILD
button for
LOCK function
operation.
2
Press the 'WASH' and 'RINSE' buttons
simultaneously for 3 seconds, and
disable the CHILD LOCK.
 Press the 'WASH' and 'RINSE' buttons simulta-
neously for 3 seconds to enable and disable the
CHILD LOCK function.
Select
the
 Once the CHILD LOCK function is set, all other
course
buttons are disabled except the POWER button.
desired.
 The power button is enabled for the user's
safety.
3
Dial the Course Selector Knob
for the desired course.
 You may change the water temperature, number
of rinse cycles and spin speed by pressing the
buttons accordingly.