Table of Contents
Advertisement
COTTON/NORMAL course
1
Select normal wash.
Press the POWER
button.
Load the laundry and close the door.
Add detergent and fabric softener in the
detergent drawer and close.
Refer to page 10 for the amount of detergent.
To change the setting during the washing operation, press the START/PAUSE button to pause, and change the setting by pressing each button.
To prevent damage to the clothes, the water temperature cannot be set to '95°C'.
Drum washer wash by beating style so that towels can be felt roughly for the settled strands. Fabric softener will help to minimize the settling of
the strands and make laundry softer.
Please note!
The washing time may take longer if laundry with absorbed water is entered.
SPEED WASH course
Use this course for less soiled clothing under 3 kg to finish the laundry quicker.
1
Press the POWER
button.
Load the laundry and close the door.
Add detergent and fabric softener in the
detergent drawer and close.
Use 1/2 of the standard recommended amount
of detergent on page 10 since the laundry is less
dirty and small.
The laundry time can be different for the load amount. Even if the amount is small, if it is wet, the washer detects that as a heavy
and large load. Thus, it will take longer time to finish.
This displays 15 minutes of remaining time if the laundry is small with 3 to 4 shirts.
Use 1/2 of the standard recommended amount of detergent on page 10.
Please note!
(5 g, based on the detergent exclusive for the drum washer)
Select the number of RINSE times to 3 or more to enhance the RINSE power.
2
Dial the Course Selector Knob
to COTTON/NORMAL course.
You may skip this step for the COTTON/
NORMAL course selection. Pressing the START/
PAUSE button will select the COTTON/NORMAL
course automatically.
This course is automatically set for a water
temperature of '40°C', spin speed 'HIGH', and
washing function 'NORMAL'.
You may change the setting of the water
temperature, number of rinse times and spin
speed by pressing the button accordingly.
2
Dial the Course Selector Knob
to the SPEED WASH course.
This course is automatically set for the SPIN
speed 'MEDIUM' and washing function
'NORMAL'.
You may change the number of rinse cycles and
spin speed by pressing the button accordingly.
STEAM is automatically selected and stops
STEAM if you want to change the water
temperature.
Water temperature is selectable among the
'COLD WASH, 30°C and 40°C '
3
Press the START/
PAUSE button.
Then, it locks the door, detects the laundry load,
supplies water, and starts washing.
Turbo Shot is automatically selected.
3
Press the START/
PAUSE button.
Then, it locks the door, supplies water, and starts
washing.
Turbo Shot is automatically selected.
Hide quick links:
Advertisement
Table of Contents
