3. Part of activities independent of serial number
Fig. 40 Tapping screws
•
Screw in the two 3.5 x 16 tapping screws using a large washer. Continue until the screws
are secure (Fig. 39).
•
Remove the two front caps (Fig. 40).
•
Pull out the inside tray of the keyboard tray.
•
Unscrew the spring steel cross bands in the back.
•
Loosen the rear transverse bar of the keyboard tray.
Siemens AG
Medical Solutions
Fig. 41 Removing the front screws
SPR2-230.814.01
Rev. 05
08.04
Page 17 of 42
SIREMOBIL Iso-C 3D
CS PS 24
6 - 17